The procedure for upgrading from LAP to LWAPP

•  Topology Upgrade

• The equipment should be prepared

1. Laptop with a wired connection
2. Console cable for remote to the Access Point
3. UTP cable for data transfer from the laptop to the Access Point
4. TFTP software (TFTPD32) to transfer the data from the laptop to the Access Point

• Procedure step buy step Upgrade AP to LWAPP

a.       Log in to Cisco AP (default login: Cisco)

b.       If the configuration contains, clean configuration by using the command

AP#erase startup-config

c.       Perform reload on the AP

AP#reload

d.      Prepare a TFTP server on PC

·         Turn on the TFTP program by clicking on the TFTP software

·         Move Access Point OS files on the TFTP root folder

e.     Setting the TFTP Server IP Address and Laptops

·         Setting the IP address 192.168.1.1 on your PC

·         Setting IP Address pada AP di interface BVI

AP#enable

AP#conf t

AP(config)#int bvi 1

AP(config-if)#ip address 192.168.1.2 255.255.255.0

AP(config-if)#no shut

f.      Perform a ping test from the laptop to the PC and also reverse its direction.

g.      Perform download the IOS from tftp command

        archive download-sw /overwrite tftp://[IP_Address_TFTP]/[IOS LWAPP]

                        example:

archive download-sw /overwrite  tftp://10.0.0.1/c1130-k9w7-tar.124-10b.JDA3.tar

h.      Perform reload

AP#reload

i.         Put this command to ensure clean WLC from the previous config

        AP#clear lwapp private-config

        AP#clear lwapp ap ip address

j.       If successful it will be a revelation of a join request from AP after the AP in reload